
Product Catalogue
Tessma – Product Catalogue
Material testing equipment for concrete, cement, bitumen, soil, steel and aggregates
This catalogue lists our current range of laboratory and field testing equipment. Specifications may change, so contact us for the latest details, configurations and quotes.
33 products in 7 categories
Aggregates & Rocks
Equipment for testing aggregate shape, strength, abrasion, polishing, specific gravity, density and silt content to IS 2386.

TG-300 – Los Angeles Abrasion Machine
Abrasion resistance
Steel drum machine with removable shelf and steel sphere charge for the Los Angeles abrasion value of coarse aggregate to IS 2386 (Part 4).
Standards: IS 2386-4, ASTM C131, EN 1097-2
Drum (inside) 700 mm dia × 500 mm long Shelf Removable steel, projects 88 mm Speed 30–33 rpm Spheres ~48 mm, 390–445 g each Charge, grading A 12 spheres, 5000 ± 25 g Charge, grading B 11 spheres, 4584 ± 25 g Charge, grading C 8 spheres, 3330 ± 20 g Charge, grading D 6 spheres, 2500 ± 15 g 
TG-201 – Flakiness Index Test Apparatus
Flakiness index
Thickness gauge for measuring the flakiness index of coarse aggregate to IS 2386 (Part 1).
Standards: IS 2386-1
Test Flakiness index Size fractions 63–50 to 10–6.3 mm Slot width 3/5 of mean sieve size Minimum particle size 6.3 mm 
TG-202 – Elongation Index Test Apparatus
Elongation index
Length gauge for measuring the elongation index of coarse aggregate to IS 2386 (Part 1).
Standards: IS 2386-1
Test Elongation index Size fractions 50–40 to 10–6.3 mm Gap between pins 1.8 × mean sieve size Minimum particle size 6.3 mm 
TG-203 – Aggregate Crushing Value Apparatus
Crushing value
Steel cylinder, plunger and base plate, with tamping rod and measure, for the aggregate crushing value test to IS 2386 (Part 4).
Standards: IS 2386-4
Cylinder (internal) 152 ± 0.5 mm dia × 130–140 mm high Cylinder wall At least 16 mm Plunger piston 150 ± 0.5 mm dia, at least 25 mm deep Plunger stem 100–150 mm dia, overall height 100–115 mm Base plate 6.3 mm thick, 200–230 mm square Contact surface hardness ≥ 650 HV, case-hardened Tamping rod 16 mm dia × 450–600 mm Measure (internal) 115 mm dia × 180 mm high 
TG-204 – Aggregate Impact Test Apparatus
Impact value
Impact tester with a 13.5 to 14 kg hammer, hardened steel cup, measure and tamping rod for the aggregate impact value test to IS 2386 (Part 4).
Standards: IS 2386-4
Total weight 45–60 kg Base 22–30 kg, ≥ 300 mm dia Hammer 13.5–14.0 kg, 100 mm dia × 50 mm Height of fall 380 ± 5 mm Cup (internal) 102 mm dia × 50 mm deep, ≥ 6.3 mm wall Measure (internal) 75 mm dia × 50 mm deep Tamping rod 10 mm dia × 230 mm 
TG-205 – Deval Abrasion Testing Machine
Abrasion value
Motorised Deval machine with cast iron cylinders set at 30 degrees, for the abrasion value of coarse aggregate to IS 2386 (Part 4).
Standards: IS 2386-4
Cylinders Cast iron, 200 mm dia × 340 mm deep (inside) Cylinder angle 30° to the axis of rotation Abrasive charge 6 spheres, ~48 mm, 2500 ± 10 g Test sieve 1.70 mm IS Power 3-phase AC, 50–60 Hz 
TG-206 – Dorry Abrasion Test Apparatus
Wear resistance
Motorised rotating-disc machine with sand hoppers and weighted holders for testing the abrasion resistance of stone.
Disc speed 28–30 rpm Drive Motor with reduction gearbox Sand feed 2 conical hoppers with start/stop Specimen holders 2, with weights Power 220 V, 50 Hz AC 
TG-207 – Accelerated Polishing Machine
Polished stone value
Accelerated polishing machine for preparing polished stone specimens to IS 2386 (Part 4), with sand and emery feeds.
Standards: IS 2386-4
Specimens per run 14 Stone surface 45 mm wide, 405 mm dia Road wheel speed 320–325 rpm Tyre 200 × 50 mm, 8 × 2 pneumatic 4-ply Tyre load 40 kg Tyre pressure 3.15 ± 0.15 kg/cm² Sand feed ~12 g/min sand + 20 g/min water Emery feed ~2 g/min emery + 5 g/min water 
TG-208 – Skid Resistance Tester
Skid resistance
Pendulum friction tester for measuring the skid resistance of polished stone specimens to IS 2386 (Part 4).
Standards: IS 2386-4
Arm weight (with slider) 1.500 ± 0.025 kg Sliding edge to axis 500 mm Slider pad 32 × 6.5 mm rubber, 25 ± 2 g Slider load 2.25 ± 0.05 kg Sliding length 75 ± 1.5 mm Pointer ≤ 85 g, adjustable friction 
TG-209 – Specific Gravity Apparatus
Specific gravity
Balance, wire basket and water container for the specific gravity of aggregate larger than 10 mm to IS 2386 (Part 3), Method I.
Standards: IS 2386-3
Method Method I, aggregate larger than 10 mm Balance ≥ 3 kg, reads to 0.5 g Basket ≤ 6.3 mm mesh, chromium plated Basket hangers ≤ 1 mm wire Optional 2 absorbent cloths, shallow tray 
TG-210 – Pycnometer
Specific gravity
One-litre glass pycnometer jar with a watertight metal conical screw top, for specific gravity tests to IS 2386 (Part 3).
Standards: IS 2386-3
Capacity About 1 litre Jar Glass Top Metal cone, 6 mm hole at apex Seal Watertight, washer if needed 
TG-211 – Bulk Density Measures
Bulk density & voids
Cylindrical metal measures of 3, 15 and 30 litres with tamping rod, for bulk density and voids of aggregate to IS 2386 (Part 3).
Standards: IS 2386-3
3 L measure 4.75 mm and under; 150 mm dia × 170 mm high; 3.15 mm wall 15 L measure Over 4.75 to 40 mm; 250 mm dia × 300 mm high; 4.00 mm wall 30 L measure Over 40 mm; 350 mm dia × 310 mm high; 5.00 mm wall Tamping rod 16 mm dia × 600 mm 
TG-212 – Density Basket
Specific gravity
Wire mesh basket with handle for weighing aggregate under water in specific gravity tests to IS 2386 (Part 3).
Standards: IS 2386-3
Size About 200 mm dia × 200 mm high Body Brass or GI Mesh Stainless steel, 6.3 or 4.75 mm Hangers ≤ 1 mm wire 
TG-213 – Sedimentation Apparatus for Clay, Fine Silt and Fine Dust
Clay, fine silt & fine dust
Andreasen pipette, jar rotator and 1000 ml cylinder for finding clay, fine silt and fine dust in aggregate by sedimentation to IS 2386 (Part 2).
Standards: IS 2386-2
Particle size covered Up to 20 micron Jar rotation 80 ± 20 rpm, axis horizontal Pipette Andreasen type, ~25 ml, two-way tap Cylinder 1000 ml
Pull-Out Testing
Testers for checking anchors and fixings and estimating the in-place strength of concrete.

TP-500 – Pull-Out Testing Machine
Anchor pull-out force
Hydraulic pull-out tester for anchors, rebars and expansion bolts, in 100 to 500 kN capacities, with analog or digital readout.
Capacity 100, 200, 300 or 500 kN Readout Analog or digital Battery (digital) Up to 24 h per charge Hydraulic pump 700 bar Hose 3 m Jack stroke Up to 50 mm Anchor adaptors M6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 42 Rebar grips Ø 6, 8, 10, 12, 14, 16, 18, 20, 22, 25, 28, 32, 36, 38, 40, 50 mm
Concrete
Compression and flexural testing machines for concrete.

TC-2000 – Automatic Compression Testing Machine 2000 kN
Compression & flexural testing
Servo-controlled 2000 kN compression machine with automatic pace rate, 7-inch touch screen, software, Wi-Fi and a 100 kN flexural attachment.
Standards: IS 516, IS 14858
Capacity 0–2000 kN Least count 0.01 kN Pace rate 1–15 kN/s, automatic Display 7" touch screen Vertical clearance 400 mm Horizontal clearance 250 mm Data storage Up to 2000 logs, USB Control AC motor, servo
Cement & Mortar
Equipment for testing the strength of cement and mortar.

TM-500 – Cement Tensile Testing Machine
Tensile & flexural strength
Motorised digital tester for the tensile strength of cement briquettes, also used for flexural tests. 500 kg capacity, supplied with briquette mould.
Capacity 500 kg Least count 0.01 kg Display Microcontroller with LCD Units kN, N or kg On failure Auto stop, peak force held Safety Emergency stop button Supplied with Briquette mould 
TM-201 – Vicat Needle Apparatus
Consistency & setting time
Vicat apparatus to IS 5513 for standard consistency and initial and final setting time of cement, with mould, glass plate, plunger and needles.
Standards: IS 5513
Initial setting needle 1.13 ± 0.05 mm dia, 50 ± 1 mm long, flat end Final setting needle 1.13 mm dia, 30 ± 1 mm long, with brass cap Final needle cap 5 ± 0.1 mm cutting edge, hollowed 0.5 ± 0.1 mm, 0.75 mm vent hole Needle projection beyond cap 0.5 ± 0.1 mm Consistency plunger Polished brass, 10 ± 0.05 mm dia, 50 ± 1 mm long Mass of each needle / plunger 9 ± 0.5 g Mass of moving unit 300 ± 1 g Scale 40 mm, 1 mm divisions 
TM-202 – Gillmore Needle Apparatus
Setting time
Gillmore needle apparatus to ASTM C266 for the initial and final setting time of hydraulic cement paste, with two weighted stainless steel needles.
Standards: ASTM C266
Initial needle 113.4 ± 0.5 g, tip 2.12 ± 0.05 mm dia Final needle 453.6 ± 0.5 g, tip 1.06 ± 0.05 mm dia Tip length (both) 4.8 ± 0.5 mm Needle material Stainless steel, flat square tips Test pat 76 ± 13 mm base, 50 ± 13 mm top, 13 ± 3 mm thick at centre 
TM-203 – Blaine Air Permeability Apparatus
Fineness (specific surface)
Blaine air permeability apparatus to IS 5516 for the fineness of cement as specific surface, with stainless steel cell, perforated disc and glass manometer.
Standards: IS 5516
Permeability cell Stainless steel, 12.7 ± 0.1 mm ID Perforated disc Brass or stainless steel, 0.9 ± 0.1 mm thick, 30 to 40 holes of 1 mm Manometer U-tube, borosilicate glass 9.0 ± 0.4 mm OD, four etched lines Air control T-joint with airtight stopcock, rubber tube and bulb Manometer liquid Dibutyl phthalate or light mineral oil Mounting Vertical stand 
TM-204 – Jolting Apparatus
Mortar prism compaction
Motorised jolting apparatus to IS 10078 for compacting 40 × 40 × 160 mm cement mortar prisms for flexural and compressive strength tests.
Standards: IS 10078
Mould taken 3-gang, 40 × 40 × 160 mm prisms Drop height 15 ± 0.1 mm (new), 15 ± 0.4 mm (in use) Cam speed 60 ± 1 rpm Table with mould, hopper and clamps 20 ± 1 kg Supporting arms 10 ± 0.3 kg Drive 1/3 hp motor with reduction gear 
TM-205 – Prism Mould 40 × 40 × 160 mm
Mortar prism moulding
Three-gang steel mould to IS 10078 for casting 40 × 40 × 160 mm cement mortar prisms for flexural and compressive strength tests.
Standards: IS 10078
Prisms 3 per mould Length between inner faces 160 ± 0.4 mm Width between inner faces 40 ± 0.1 mm Height 40 ± 0.1 mm Wall plate thickness 10 mm min Angle between faces and base 90 ± 0.5° Flatness of walls Within 0.02 mm Base plate 276 ± 2 × 240 ± 2 mm 
TM-206 – Flow Table Apparatus
Flow of mortar
Hand-operated flow table for the flow and consistency of cement, pozzolana and lime mortars, to IS 5512 and IS 6932.
Standards: IS 5512, IS 6932
Table top 250 ± 2.5 mm dia, machined Drop height 12 mm, cam operated Mass of table and shaft 4.00 ± 0.05 kg Frame Cast iron Operation Hand wheel 
TM-207 – Gauging Trowel
Mixing cement paste
Steel gauging trowel for mixing cement paste and mortar in consistency and setting time tests, weighing 210 ± 10 g.
Standards: IS 10086
Blade Mild steel or stainless steel, 1.5 mm min thick Blade length 195 mm, or 100 to 150 mm Edges Straight or rounded Handle Wooden or ergonomic grip Weight 210 ± 10 g
Steel
Universal testing machines for tension, compression and bend tests on steel.

TS-1000 – Semi-Automatic Universal Testing Machine 1000 kN
Tension, compression & bending
Semi-automatic 1000 kN universal testing machine with software, for tension, compression and transverse (bend) tests such as rebar tensile tests.
Standards: IS 1608
Capacity 1000 kN Load resolution 100 N Accuracy ±1% from 20 to 1000 kN Piston resolution 0.1 mm Ram stroke 250 mm Piston speed 0–80 mm/min Tensile clearance 50–850 mm Clearance between columns Up to 850 mm
Soil
Triaxial shear testing equipment for soil, to IS 2720.

TL-201 – Triaxial Shear Test Apparatus
Triaxial shear strength
Triaxial set for 38 mm soil specimens with three-speed load frame, load cell, LVDT, pore pressure sensor and Bishop pore pressure apparatus.
Standards: IS 2720-11, IS 2720-12
Specimen size 38 mm dia Load frame speeds 1.25 / 1.5 / 2.5 mm/min Load cell 500 kg Displacement LVDT Pore pressure Pressure sensor + Bishop apparatus Cell pressure Up to 10 kg/cm², foot pump Bishop gauge 200 mm dia, 1.0–10 kg/cm² × 0.1 kg/cm² Volume change 50 ml burette 
TL-202 – Triaxial Shear Test Apparatus with Software
Triaxial shear strength
Computerised triaxial set for 38 mm soil specimens with 50 kN three-speed frame, sensors, software and air-water pressure system, to IS 2720 (Part 11).
Standards: IS 2720-11, IS 2720-12
Specimen size 38 mm dia Load frame 50 kN, 3 speeds Load cell 500 kg LVDT 0.01 mm × 25 mm travel Control Microprocessor controller with software Confining & back pressure Up to 10 kg/cm², air over water Pressure gauges 2, reading to 0.1 kg/cm²
General Equipment
Sample preparation and sieving: jaw crusher, pulveriser, riffle divider, test sieves and sieve shakers.

TG-214 – Laboratory Jaw Crusher
Crushing
Motor-driven jaw crusher with manganese steel jaws for crushing samples in laboratories and small production units.
Jaws Manganese steel Discharge opening (lab model) 3–10 mm Output (lab model) About 250 kg in 8 hours Power 440 V, 3-phase AC 100 × 150 mm (4 × 6") Feed 25–30 mm, discharge 6–20 mm, 3 HP, 150–200 kg/h 150 × 200 mm (6 × 8") Feed 45–50 mm, discharge 10–22 mm, 5 HP, 300–400 kg/h 200 × 300 mm (8 × 12") Feed 65–70 mm, discharge 12–25 mm, 7.5 HP, 400–500 kg/h 300 × 400 mm (12 × 16") Feed 90–100 mm, discharge 15–30 mm, 10 HP, 600–750 kg/h 
TG-215 – Laboratory Pulveriser
Grinding
Disc pulveriser that grinds about 450 g of quartz-type material to 100 mesh in one minute. Used in cement and chemical labs.
Grinding wheel 175 mm dia, high carbon steel, 53–60 HRC Feed size Up to 6 mm Output About 450 g to 100 mesh in 1 minute Power 440 V, 3-phase AC 
TG-216 – Riffle Sample Divider
Sample splitting
Sheet metal riffle box with equal chutes that split a sample into two matching halves. Available from 7 mm to 75 mm.
Construction Sheet metal Discharge Alternate chutes into 2 pans Sizes 7–75 mm 
TG-217 – Standard Test Sieves
Particle size
GI test sieves with 18-gauge perforated CRC plate, 300 mm and 450 mm diameter, in aperture sizes from 125 mm down to 1.18 mm.
Standards: IS 460
Diameter 300 mm (12") or 450 mm (18") Frame GI sheet Mesh Perforated CRC sheet, 18 gauge Apertures 125 mm to 1.18 mm 
TG-218 – Sieve Shaker
Particle size
Motorised sieve shaker for up to 7 sieves of 200, 300 or 450 mm, with gyratory and up-and-down motion.
Capacity Up to 7 sieves Sieve diameter 200, 300 or 450 mm Motor 1/4 HP, oil-immersed reduction gear Motion Gyratory + up and down Power 230 V, 50 Hz, single phase 
TG-219 – Hand Operated Sieve Shaker
Particle size
Hand-cranked sieve shaker in powder-coated mild steel, for 200, 300 and 450 mm sieves.
Operation Manual, handle Construction Mild steel, powder coated Sieve diameter 200, 300 or 450 mm
