Aggregates & Rocks

Abrasion
TG-300 – Los Angeles Abrasion Machine
Abrasion resistance
A hollow steel drum, closed at both ends, 700 mm in diameter and 500 mm long inside. It turns horizontally on stub shafts fixed to the ends that do not pass into the drum.
The sample goes in through an opening with a removable, bolted cover that closes dust-tight and keeps the inside of the drum round. A removable steel shelf runs the full length of the drum and sticks out 88 mm towards the centre. It is bolted firmly in place, at least 1250 mm from the opening measured round the drum in the direction of rotation.
The abrasive charge is cast iron or steel spheres, about 48 mm in diameter and 390 to 445 g each. The number of spheres depends on the grading of the sample (see the specifications). After the test, the sample is sieved on a 1.70 mm IS sieve.
Supplied ready for use with operating manual and test certificate. Contact us for configuration options, accessories and calibration services.
Technical specifications
| Drum (inside) | 700 mm dia × 500 mm long |
|---|---|
| Shelf | Removable steel, projects 88 mm |
| Speed | 30–33 rpm |
| Spheres | ~48 mm, 390–445 g each |
| Charge, grading A | 12 spheres, 5000 ± 25 g |
| Charge, grading B | 11 spheres, 4584 ± 25 g |
| Charge, grading C | 8 spheres, 3330 ± 20 g |
| Charge, grading D | 6 spheres, 2500 ± 15 g |
| Charge, gradings E, F, G | 12 spheres, 5000 ± 25 g |
| Test sieve | 1.70 mm IS |
Request information
Tell us about your requirements and we will get back to you.



