Cement & Mortar

Setting Time & Consistency
TM-201 – Vicat Needle Apparatus
Consistency & setting time
The Vicat apparatus is the standard way to find the normal consistency of cement paste and its initial and final setting times. Cement paste is filled into the conical mould on a glass plate, and the weighted moving rod is released so the plunger or needle sinks into it. The depth it reaches is read on the scale.
The set includes the stand with moving rod and 40 mm scale, the Vicat mould, a glass base plate, the 10 mm consistency plunger, and the initial and final setting needles. Each needle and the plunger weighs 9 ± 0.5 g, and the moving unit with any one of them fitted weighs 300 ± 1 g, as IS 5513 requires.
The final setting needle has a brass cap with a 5 mm circular cutting edge, so the final set is reached when the needle marks the paste but the cutting edge does not.
Supplied ready for use with operating manual and test certificate. Contact us for configuration options, accessories and calibration services.
Technical specifications
| Initial setting needle | 1.13 ± 0.05 mm dia, 50 ± 1 mm long, flat end |
|---|---|
| Final setting needle | 1.13 mm dia, 30 ± 1 mm long, with brass cap |
| Final needle cap | 5 ± 0.1 mm cutting edge, hollowed 0.5 ± 0.1 mm, 0.75 mm vent hole |
| Needle projection beyond cap | 0.5 ± 0.1 mm |
| Consistency plunger | Polished brass, 10 ± 0.05 mm dia, 50 ± 1 mm long |
| Mass of each needle / plunger | 9 ± 0.5 g |
| Mass of moving unit | 300 ± 1 g |
| Scale | 40 mm, 1 mm divisions |
| Vicat mould | Conical, 70 ± 5 mm top and 80 ± 5 mm bottom ID, 40 ± 0.2 mm high, 4 mm min wall |
| Base plate | Glass or stainless steel, 2.5 mm min thick |
Request information
Tell us about your requirements and we will get back to you.



