Tessma – Technical Engineering Solutions for Solid Material Assessment

Setting time of cement: Vicat or Gillmore?

Guide · 2026-11-07

Both measure when cement paste starts and finishes setting. Here is how each test works and which standard asks for which.

Setting time of cement: Vicat or Gillmore?

Setting time tells you how long cement paste stays workable and when it starts to harden. There are two common ways to measure it, and which one you need depends on the standard you work to.

The Vicat apparatus (IS 5513) is the usual choice in India. A weighted rod of 300 g carries a fine needle that is released into the paste in a conical mould. Initial set is reached when the needle no longer goes all the way through. For final set a second needle with a 5 mm brass cap is used: the paste has set when the needle leaves a mark but the cap does not. The same apparatus, fitted with a 10 mm plunger, finds the standard consistency of the paste first.

The Gillmore apparatus (ASTM C266) uses two needles on a pat of paste instead. The light needle weighs 113.4 g with a 2.12 mm tip and the heavy needle weighs 453.6 g with a 1.06 mm tip. Initial and final set are reached when the paste carries each needle without a visible mark. It is the method for labs working to ASTM specifications.

We supply both: the Vicat needle apparatus (TM-201) and the Gillmore needle apparatus (TM-202), under Cement & Mortar on our website. Contact us for prices, delivery times or help choosing equipment for your laboratory.