Guide · 2026-09-24
We supply two triaxial sets for 38 mm soil specimens to IS 2720. One reads pore pressure with a Bishop apparatus; the other adds software and air-over-water pressure.

The triaxial test measures the shear strength of soil under a confining pressure, and is widely used in design work for foundations and slopes. We supply two sets for 38 mm specimens, both to IS 2720 (Parts 11 and 12).
The TL-201 has a load frame with three speeds (1.25, 1.5 and 2.5 mm per minute), a 500 kg load cell, an LVDT and a pore pressure sensor. It also comes with a hand-operated Bishop pore pressure apparatus, and cell pressure up to 10 kg/cm² is applied with a foot pump.
The TL-202 is the computerised version. It has a 50 kN three-speed frame, a 500 kg load cell, an LVDT reading 0.01 mm, and a microprocessor controller with software. Confining and back pressure come from two air-over-water cells, up to 10 kg/cm².
The TL-201 suits a lab that runs triaxial tests now and then. If you test often and want the software to record the readings, the TL-202 will save time. Both are under Soil on our website. Contact us for prices, delivery times or help choosing equipment for your laboratory.
