Guide · 2026-09-15
How the prism mould and jolting apparatus work together to make mortar prisms for flexural and compressive strength tests under IS 4031 (Part 8).

IS 4031 (Part 8) tests the flexural and compressive strength of mortar on 40 × 40 × 160 mm prisms. The results are only comparable if every prism is made the same way, which is the job of the mould and the jolting apparatus.
The prism mould casts three prisms at once. Its inner faces are held to 160 ± 0.4 mm long and 40 ± 0.1 mm wide and high, with walls at least 10 mm thick, as IS 10078 sets out. Clamping screws hold the walls square on the base and let the mould come apart for demoulding.
The jolting apparatus compacts the mortar in the mould. A cam lifts the table and drops it 15 mm, 60 times a minute, so each prism is compacted the same way.
After curing, each prism is broken in bending first, and the two halves are then tested in compression.
We supply the prism mould (TM-205) and the jolting apparatus (TM-204), under Cement & Mortar on our website. Contact us for prices, delivery times or help choosing equipment for your laboratory.
